6.15 INNER BARREL / For Tokyo Marui NEXT GENERATION MP5A5・Tokyo Marui NEXT GENERATION MP5A5 Short
¥4,037 – ¥5,683
《SPEC》
■Outer Diameter：8.55mm
■Inner Diameter：6.15mm
■Tolerance：±0.002mm
■Material：SUS304
Description
《Information》
PDI’s 15 inner barrel with a loose 6.15 mm inner diameter.
Although acuracy is increased, there is a high possibility that the initial speed will decrease.
This barrel is suitable for indoor use and when you want to lower the initial speed compared to the normal barrel and to improve accuracy.
★★★ [Please note] ★★★
For Tokyo Marui NEXT GENERATION MP5A5 Short
※This barrel is produced to have the the same FPS the 6.08 inner barrel of Tokyo Marui’s next-generation MP5A5, which is approximately 0.8J (about 87-88m / s with 0.2gBB bullets). When purchasing different inner diameters with the same barrel length, please note the FPS regulations in your area before purchasing.
※These are for the next generation AEG. It is not compatible with the standard MP5. Please be careful when purchasing.
※The increase in FPS and range are not proportional.
※Laser marking and engraving variations depends on the production lot.
※Although a non-magnetic austenitic material is used, magnetic force might be induced during the manufacturing process.
※In some rare cases, a thin striped pattern can be seen on the inner surface, but this does not affect performance.
《SPEC》
■Outer Diameter：8.55mm
■Inner Diameter：6.15mm
■Tolerance：±0.002mm
■Material：SUS304
