6.15 INNER BARREL 230mm / MARUZEN CA870 SERIES
¥6,237
《SPEC》
■Length：230mm
■Usable gun：
＃MARUZEN CA870
■Outer Diameter：8.55mm
■Inner Diameter：6.15mm
■Tolerance：±0.002mm
■Material：SUS304
Description
《Information》
PDI’s 15 inner barrel with a loose 6.15 mm inner diameter.
Although acuracy is increased, there is a high possibility that the initial speed will decrease.
This barrel is suitable for indoor use and when you want to lower the initial speed compared to the normal barrel and to improve accuracy.
※The increase in FPS and range are not proportional.
※Laser marking and engraving variations depends on the production lot.
※Although a non-magnetic austenitic material is used, magnetic force might be induced during the manufacturing process.
※In some rare cases, a thin striped pattern can be seen on the inner surface, but this does not affect performance.
*Please note
This product is for the new MARUZEN CA870 HOP only.
When purchasing, please be sure to check the barrel shape of the CA870 you are replacing.
The barrel shapes of the old HOP and the new HOP are completely different.
This product cannot be installed on the old HOP.
This product has an outer diameter of 8mm around the HOP window and 8.55mm elsewhere (MARUZEN genuine barrel is 8mm). Some parts such as the inner barrel spacer may require processing when installed. In that case, please handle it yourself by processing the barrel spacer hole, etc.
*Although non-magnetic austenitic material is used, it may become magnetic during the manufacturing process.
《SPEC》
■Length：230mm
■Usable gun：
＃MARUZEN CA870
■Outer Diameter：8.55mm
■Inner Diameter：6.15mm
■Tolerance：±0.002mm
■Material：SUS304
